SOIL & FERTILIZERS
Moisture / Solids Analysis

The CEM SMART 6™ is the fastest combined microwave with halogen moisture/solids analysis system available on the market.

Samples reach optimal drying temperature in less than 5 seconds.

Your total Moisture Analysis will only take 2-4 minutes.

Rapid and simple Ash Analysis

Ash samples with unmatched speed and safety with the new CEM Phoenix BLACK™.

 

The new Phoenix BLACK incorporates an updated cavity design with dual magnetron technology, delivering twice as much power for even faster results. With an onboard touchscreen interface, you’ll save time and simplify your workflow.

Make rapid adjustments to reduce out-of-specification products and improve your process control.

The Phoenix Black can be paired with a balance and a printer for automatic results.

Rapid Bulk and Parallel Sample Drying

The CEM SAM 255™ is a unique instrument for rapidly drying samples up to 1kg in size. It can be used for moisture analysis or as a preparatory step for further analysis. Drying times are reduced from hours to minutes with the precision of a conventional oven method. Almost any material can be dried using microwave energy as the volatile component can be water or a wide range of polar organic compounds. The system also features a unique design avoiding problems with reflected power that prevents complete drying of samples in conventional microwave ovens.

Accurate macro sample analysis made easy

Elementar's vario MACRO cube combines innovative new technical solutions with tried-and-tested techniques to facilitate the simultaneous determination of CHNS in samples up to the gram range, and represents the world’s first analyzer to make this possible in a single fully-automated step.

The modular nature of the vario MACRO cube means that it is ready to meet today’s and tomorrow’s laboratory requirements. However, the most important requirement of an analyzer remains the precision of the analysis - and the vario MACRO cube simply works, delivering accurate results every time.

The intelligent sample preparation for your elemental analysis

CEM Mars 6 is the easiest, safest and most intelligent microwave digestion system on the market.

It is the only system that uses integrated sensor technology to recognize the vessel type as well as the sample number then apply the appropriate amount of power to ensure the highest quality digest. With options for remote system control and contactless all vessel temperature control, the MARS 6 is ready to handle your most difficult samples.

iLink: Monitor and control your Mars 6

With iLink you will be able to operate and monitor your MARS 6, or multiple MARS 6 systems, and get the results on your mobile device. You’ll be free to move around in the lab and free to focus on other tasks.

Maximum performance with a minimal footprint

Elementar's vario MAX cube takes full advantage of the benefits offered by the Dumas combustion method, which has become the worldwide standard for the accurate and rapid determination of nitrogen in samples such as agricultural products. When dealing with larger sample sizes of 1 g or more, this method has been proven superior to the wet chemical Kjeldahl method in terms of speed, safety and environmental friendliness - and the vario MAX cube’s performance showcases this.

Determination of the nitrogen contentin inorganic fertilizers

Inorganic fertilizers show a difficult combustion behavior due to the lack of combustible organic material. The special multi chamber furnace of the rapid MAX N exceed allows an extreme permanent combustion temperature, which is a prerequisite for quantitative analysis of samples which are difficult to combust. The instrument utilizes the innovative EAS REGAINER® technology, reducing costs of analysis and maintenance significantly.

Clean, economical and efficient metal digestions

The Environmental Express Hotblocks have revolutionized the way laboratories think of metals digestions.  With these HotBlocks, laboratories can now perform digestions of samples under uniform temperature conditions up to 96 samples at a time.  The HotBlock is made of a PTFE-coated graphite block within a Kydex® housing with no exposed metallic parts reducing corrosion potential from the highly acidic environment.  The HotBlock® utilizes our disposable polypropylene digestion tubes for all EPA approved metals digestions, allowing laboratories to eliminate the washing of glassware.

Automation of the sample prep steps in the laboratory is oftentimes key to a laboratory's overall success. With the introduction of the AutoBlock, we have truly automated the metals digestion process.  Users no longer have to manually add acid and reagents to samples, set timers to turn off heat, or manually adjust temperatures based on various method requirements.

Temperature-dependent differentiation of carbon in solids

The determination of TOC in solids has recently become more important. Not just for evaluating wastes, TOC-content measurement is also an important aspect of assessing soils.
Elementar's soli TOC cube offers users the option of measuring not only total organic and total inorganic carbon, but also determining the residual oxidizable carbon (ROC). In addition to the classical TOC determination by direct and subtraction acidification methods, temperature programming can also be employed, which requires neither sample preparation nor the use of acids.

water-839590_640.jpg

Extractions of Pesticides, PAH, PFAS, dioxins & VOC

The EDGE® is an automated extraction system that’s faster than Soxhlet, more automated than QuEChERS, and simpler than other solvent extraction systems. Extract a wide range of samples and sizes at least 3 times faster than other pressurized fluid extractors. This includes filtering, cooling, and washing. 

 
 
 
 
 
 
 
 

2020 - Beun - De Ronde BV

Bovenkamp 9

1391 LA Abcoude

The Netherlands

+31 (0)294 280 980

info@beunderonde.nl

www.beunderonde.nl

  • LinkedIn Social Icon